AZ-104-MicrosoftAzureAdministrator/Instructions/Labs/LAB_06-Implement_Network_Traffic_Management.md

lab

lab
title module 06 - Implement Traffic Management Module 06 - Network Traffic Management

Lab 06 - Implement Traffic Management

Student lab manual

Lab scenario

You were tasked with testing managing network traffic targeting Azure virtual machines in the hub and spoke network topology, which Contoso considers implementing in its Azure environment (instead of creating the mesh topology, which you tested in the previous lab). This testing needs to include implementing connectivity between spokes by relying on user defined routes that force traffic to flow via the hub, as well as traffic distribution across virtual machines by using layer 4 and layer 7 load balancers. For this purpose, you intend to use Azure Load Balancer (layer 4) and Azure Application Gateway (layer 7).

Objectives

In this lab, you will:

• Task 1: Provision the lab environment
• Task 2: Configure the hub and spoke network topology
• Task 3: Test transitivity of virtual network peering
• Task 4: Configure routing in the hub and spoke topology
• Task 5: Implement Azure Load Balancer
• Task 6: Implement Azure Application Gateway

Instructions

Exercise 1

Task 1: Provision the lab environment

In this task, you will deploy four virtual machines into the same Azure region. The first two will reside in a hub virtual network, while each of the remaining to will reside in a separate spoke virtual network.

1. Sign in to the Azure portal.

2. In the Azure portal, open the Azure Cloud Shell by clicking on the icon in the top right of the Azure Portal.

3. If prompted to select either Bash or PowerShell, select PowerShell.

   Note

   : If this is the first time you are starting Cloud Shell and you are presented with the You have no storage mounted message, select the subscription you are using in this lab, and click Create storage.

4. In the toolbar of the Cloud Shell pane, click the Upload/Download files icon, in the drop-down menu, click Upload and upload the files \Allfiles\Module_06\az104-06-vms-template.json, \Allfiles\Labs\06\az104-06-vm-template.json, and \Allfiles\Labs\06\az104-06-vm-parameters.json into the Cloud Shell home directory.

5. From the Cloud Shell pane, run the following to create the first resource group that will be hosting the first virtual network and the pair of virtual machines (replace the [Azure_region] placeholder with the name of an Azure region where you intend to deploy Azure virtual machines):

   $location = '[Azure_region]'
   
   $rgName = 'az104-06-rg1'
   
   New-AzResourceGroup -Name $rgName -Location $location
   

6. From the Cloud Shell pane, run the following to create the first virtual network and deploy a pair of virtual machines into it by using the template and parameter files you uploaded:

   New-AzResourceGroupDeployment `
      -ResourceGroupName $rgName `
      -TemplateFile $HOME/az104-06-vms-template.json `
      -TemplateParameterFile $HOME/az104-06-vm-parameters.json `
      -AsJob
   

7. From the Cloud Shell pane, run the following to create the second resource group that will be hosting the second virtual network and the third virtual machine

   $rgName = 'az104-06-rg2'
   
   New-AzResourceGroup -Name $rgName -Location $location
   

8. From the Cloud Shell pane, run the following to create the second virtual network and deploy a virtual machine into it by using the template and parameter files you uploaded:

   New-AzResourceGroupDeployment `
      -ResourceGroupName $rgName `
      -TemplateFile $HOME/az104-06-vm-template.json `
      -TemplateParameterFile $HOME/az104-06-vm-parameters.json `
      -nameSuffix 2 `
      -AsJob
   

9. From the Cloud Shell pane, run the following to create the third resource group that will be hosting the third virtual network and the fourth virtual machine:

   $rgName = 'az104-06-rg3'
   
   New-AzResourceGroup -Name $rgName -Location $location
   

10. From the Cloud Shell pane, run the following to create the third virtual network and deploy a virtual machine into it by using the template and parameter files you uploaded:

    New-AzResourceGroupDeployment `
       -ResourceGroupName $rgName `
       -TemplateFile $HOME/az104-06-vm-template.json `
       -TemplateParameterFile $HOME/az104-06-vm-parameters.json `
       -nameSuffix 3 `
       -AsJob
    

    Note

    : Wait for the deployments to complete before proceeding to the next task. This should take about 5 minutes.

    Note

    : To verify the status of the deployments, you can examine the properties of the resource groups you created in this task.

11. Close the Cloud Shell pane.

Task 2: Configure the hub and spoke network topology

In this task, you will configure local peering between the virtual networks you deployed in the previous tasks in order to create a hub and spoke network topology.

1. In the Azure portal, search for and select Virtual networks.

2. Review the virtual networks you created in the previous task.

   Note

   : The template you used for deployment of the three virtual networks ensures that the IP address ranges of the three virtual networks do not overlap.

3. In the list of virtual networks, click az104-06-vnet01.

4. On the az104-06-vnet01 virtual network blade, in the Settings section, click Peerings and then click + Add.

5. Add a peering with the following settings (leave others with their default values):

   Setting	Value
   Name of the peering from az104-06-vnet01 to remote virtual network	az104-06-vnet01_to_az104-06-vnet2
   Virtual network deployment model	Resource manager
   Subscription	the name of the Azure subscription you are using in this lab
   Virtual network	az104-06-vnet2 (az104-06-rg2)
   Name of the peering from az104-06-vnet2 to az104-06-vnet01	az104-06-vnet2_to_az104-06-vnet01
   Allow virtual network access from az104-06-vnet01 to az104-06-vnet2	Enabled
   Allow virtual network access from az104-06-vnet2 to az104-06-vnet01	Enabled
   Allow forwarded traffic from az104-06-vnet2 to az104-06-vnet01	Enabled
   Allow forwarded traffic from az104-06-vnet01 to az104-06-vnet2	Enabled
   Allow gateway transit	(Uncheck Box)

   Note

   : Wait for the operation to complete.

   Note

   : This step establishes two local peerings - one from az104-06-vnet01 to az104-06-vnet2 and the other from az104-06-vnet2 to az104-06-vnet01.

   Note

   : Allow forwarded traffic needs to be enabled in order to facilitate routing between spoke virtual networks, which you will implement later in this lab.

6. On the az104-06-vnet01 virtual network blade, in the Settings section, click Peerings and then click + Add.

7. Add a peering with the following settings (leave others with their default values):

   Setting	Value
   Name of the peering from az104-06-vnet01 to remote virtual network	az104-06-vnet01_to_az104-06-vnet3
   Virtual network deployment model	Resource manager
   Subscription	the name of the Azure subscription you are using in this lab
   Virtual network	az104-06-vnet3 (az104-06-rg3)
   Name of the peering from az104-06-vnet3 to az104-06-vnet01	az104-06-vnet3_to_az104-06-vnet01
   Allow virtual network access from az104-06-vnet01 to az104-06-vnet3	Enabled
   Allow virtual network access from az104-06-vnet3 to az104-06-vnet01	Enabled
   Allow forwarded traffic from az104-06-vnet3 to az104-06-vnet01	Enabled
   Allow forwarded traffic from az104-06-vnet01 to az104-06-vnet3	Enabled
   Allow gateway transit	(Uncheck Box)

   Note

   : This step establishes two local peerings - one from az104-06-vnet01 to az104-06-vnet3 and the other from az104-06-vnet3 to az104-06-vnet01. This completes setting up the hub and spoke topology (with two spoke virtual networks).

   Note

   : Allow forwarded traffic needs to be enabled in order to facilitate routing between spoke virtual networks, which you will implement later in this lab.

Task 3: Test transitivity of virtual network peering

In this task, you will test transitivity of virtual network peering by using Network Watcher.

1. In the Azure portal, search for and select Network Watcher.

2. On the Network Watcher blade, expand the listing of Azure regions and verify that the service is enabled in the Azure into which you deployed resources in the first task of this lab.

3. On the Network Watcher blade, navigate to the Connection troubleshoot.

4. On the Network Watcher - Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	az104-06-rg1
   Source type	Virtual machine
   Virtual machine	az104-06-vm0
   Destination	Specify manually
   URI, FQDN or IPv4	10.62.0.4
   Protocol	TCP
   Destination Port	3389

   Note

   : 10.62.0.4 represents the private IP address of az104-06-vm2

5. Click Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the connection was direct, with no intermediate hops in between the VMs.

   Note

   : This is expected, since the hub virtual network is peered directly with the first spoke virtual network.

   Note

   : The initial check can take about 2 minutes because it requires installation of the Network Watcher Agent virtual machine extension on az104-06-vm0.

6. On the Network Watcher - Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	az104-06-rg1
   Source type	Virtual machine
   Virtual machine	az104-06-vm0
   Destination	Specify manually
   URI, FQDN or IPv4	10.63.0.4
   Protocol	TCP
   Destination Port	3389

   Note

   : 10.63.0.4 represents the private IP address of az104-06-vm3

7. Click Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the connection was direct, with no intermediate hops in between the VMs.

   Note

   : This is expected, since the hub virtual network is peered directly with the second spoke virtual network.

8. On the Network Watcher - Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	az104-06-rg2
   Source type	Virtual machine
   Virtual machine	az104-06-vm2
   Destination	Specify manually
   URI, FQDN or IPv4	10.63.0.4
   Protocol	TCP
   Destination Port	3389

9. Click Check and wait until results of the connectivity check are returned. Note that the status is Unreachable.

   Note

   : This is expected, since the two spoke virtual networks are not peered with each other (virtual network peering is not transitive).

Task 4: Configure routing in the hub and spoke topology

In this task, you will configure and test routing between the two spoke virtual networks by enabling IP forwarding on the network interface of the az104-06-vm0 virtual machine, enabling routing within its operating system, and configuring user-defined routes on the spoke virtual network.

1. In the Azure portal, search and select Virtual machines.

2. On the Virtual machines blade, in the list of virtual machines, click az104-06-vm0.

3. On the az104-06-vm0 virtual machine blade, in the Settings section, click Networking.

4. Click the az104-06-nic0 link next to the Network interface label, and then, on the az104-06-nic0 network interface blade, in the Settings section, in the Settings section, click IP configurations.

5. Set IP forwarding to Enabled and save the change.

   Note

   : This setting is required in order for az104-06-vm0 to function as a router, which will route traffic between two spoke virtual networks.

   Note

   : Now you need to configure operating system of the az104-06-vm0 virtual machine to support routing.

6. In the Azure portal, navigate back to the az104-06-vm0 Azure virtual machine blade and click Overview.

7. On the az104-06-vm0 blade, in the Operations section, click Run command, and, in the list of commands, click RunPowerShellScript.

8. On the Run Command Script blade, type the following and click Run to install the Remote Access Windows Server role.

   Install-WindowsFeature RemoteAccess -IncludeManagementTools
   

   Note

   : Wait for the confirmation that the command completed successfully.

9. On the Run Command Script blade, type the following and click Run to install the Routing role service.

   Install-WindowsFeature -Name Routing -IncludeManagementTools -IncludeAllSubFeature
   
   Install-WindowsFeature -Name "RSAT-RemoteAccess-Powershell"
   
   Install-RemoteAccess -VpnType RoutingOnly
   
   Get-NetAdapter | Set-NetIPInterface -Forwarding Enabled
   

   Note

   : Wait for the confirmation that the command completed successfully.

   Note

   : Now you need to create and configure user defined routes on the spoke virtual networks.

10. In the Azure portal, search and select Route tables and, on the Route tables blade, click + Add.

11. Create a route table with the following settings (leave others with their default values):

    Setting	Value
    Name	az104-06-rt23
    Subscription	the name of the Azure subscription you are using in this lab
    Resource group	az104-06-rg2
    Location	the name of the Azure region in which you created the virtual networks
    Virtual network gateway route propagation	Disabled

    Note

    : Wait for the route table to be created. This should take about 3 minutes.

12. Back on the Route tables blade, click Refresh and then click az104-06-rt23.

13. On the az104-06-rt23 route table blade, click Routes and then click + Add.

14. Add a new route with the following settings (leave others with their default values):

    Setting	Value
    Route name	az104-06-route-vnet2-to-vnet3
    Address prefix	10.63.0.0/20
    Next hop type	Virtual appliance
    Next hop address	10.60.0.4

15. Back on the az104-06-rt23 route table blade, click Subnets and then click + Associate.

16. Associate the route table az104-06-rt23 with the following subnet:

    Setting	Value
    Virtual network	az104-06-vnet2
    Subnet	subnet0

17. Navigate back to Route tables blade and click + Add.

18. Create a route table with the following settings (leave others with their default values):

    Setting	Value
    Name	az104-06-rt32
    Subscription	the name of the Azure subscription you are using in this lab
    Resource group	az104-06-rg3
    Location	the name of the Azure region in which you created the virtual networks
    Virtual network gateway route propagation	Disabled

    Note

    : Wait for the route table to be created. This should take about 3 minutes.

19. Back on the Route tables blade, click Refresh and then click az104-06-rt32.

20. On the az104-06-rt32 route table blade, click Routes and then click + Add.

21. Add a new route with the following settings (leave others with their default values):

    Setting	Value
    Route name	az104-06-route-vnet3-to-vnet2
    Address prefix	10.62.0.0/20
    Next hop type	Virtual appliance
    Next hop address	10.60.0.4

22. Back on the az104-06-rt32 route table blade, click Subnets and then click + Associate.

23. Associate the route table az104-06-rt32 with the following subnet:

    Setting	Value
    Virtual network	az104-06-vnet3
    Subnet	subnet0

24. In the Azure portal, navigate back to the Network Watcher - Connection troubleshoot blade.

25. On the Network Watcher - Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

    Setting	Value
    Subscription	the name of the Azure subscription you are using in this lab
    Resource group	az104-06-rg2
    Source type	Virtual machine
    Virtual machine	az104-06-vm2
    Destination	Specify manually
    URI, FQDN or IPv4	10.63.0.4
    Protocol	TCP
    Destination Port	3389

26. Click Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the traffic was routed via 10.60.0.4, assigned to the az104-06-nic0 network adapter.

    Note

    : This is expected, since the traffic between spoke virtual networks is now routed via the virtual machine located in the hub virtual network, which functions as a router.

    Note

    : You can use Network Watcher to view topology of the network.

Task 5: Implement Azure Load Balancer

In this task, you will implement an Azure Load Balancer in front of the two Azure virtual machines in the hub virtual network

1. In the Azure portal, search and select Load balancers and, on the Load balancers blade, click + Add.

2. Create a load balancer with the following settings (leave others with their default values):

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	the name of a new resource group az104-06-rg4
   Name	az104-06-lb4
   Region	name of the Azure region into which you deployed all other resources in this lab
   Type	Public
   SKU	Standard
   Public IP address	Create new
   Public IP address name	az104-06-pip4
   Availability zone	Zone-redundant
   Add a public IPv6 address	No

   Note

   : Wait for the Azure load balancer to be provisioned. This should take about 2 minutes.

3. On the deployment blade, click Go to resource.

4. On the az104-06-lb4 load balancer blade, click Backend pools and click + Add.

5. Add a backend pool with the following settings (leave others with their default values):

   Setting	Value
   Name	az104-06-lb4-be1
   Virtual network	az104-06-vnet01
   IP version	IPv4
   Virtual machine	az104-06-vm0
   Virtual machine IP address	ipconfig1 (10.60.0.4)
   Virtual machine	az104-06-vm1
   Virtual machine IP address	ipconfig1 (10.60.1.4)

6. Wait for the backend pool to be created, click Health probes, and then click + Add.

7. Add a health probe with the following settings (leave others with their default values):

   Setting	Value
   Name	az104-06-lb4-hp1
   Protocol	TCP
   Port	80
   Interval	5
   Unhealthy threshold	2

8. Wait for the health probe to be created, click Load balancing rules, and then click + Add.

9. Add a load balancing rule with the following settings (leave others with their default values):

   Setting	Value
   Name	az104-06-lb4-lbrule1
   IP Version	IPv4
   Protocol	TCP
   Port	80
   Backend port	80
   Backend pool	az104-06-lb4-be1
   Health probe	az104-06-lb4-hp1
   Session persistence	None
   Idle timeout (minutes)	4
   TCP reset	Disabled
   Floating IP (direct server return)	Disabled
   Create implicit outbound rules	Yes

10. Wait for the load balancing rule to be created, click Overview, and note the value of the Public IP address.

11. Start another browser window and navigate to the IP address you identified in the previous step.

12. Verify that the browser window displays the message Hello World from az104-06-vm0 or Hello World from az104-06-vm1.

13. Open another browser window but this time by using InPrivate mode and verify whether the target vm changes (as indicated by the message).

    Note

    : You might need to refresh the browser window or open it again by using InPrivate mode.

Task 6: Implement Azure Application Gateway

In this task, you will implement an Azure Application Gateway in front of the two Azure virtual machines in the spoke virtual networks.

1. In the Azure portal, search and select Virtual networks.

2. On the Virtual networks blade, in the list of virtual networks, click az104-06-vnet01.

3. On the az104-06-vnet01 virtual network blade, in the Settings section, click Subnets, and then click + Subnet.

4. Add a subnet with the following settings (leave others with their default values):

   Setting	Value
   Name	subnet-appgw
   Address range (CIDR block)	10.60.3.224/27
   Network security group	None
   Route table	None

   Note

   : This subnet will be used by the Azure Application Gateway instances, which you will deploy later in this task. The Application Gateway requires a dedicated subnet of /27 or larger size.

5. In the Azure portal, search and select Application Gateways and, on the Application Gateways blade, click + Add.

6. On the Basics tab of the Create an application gateway blade, specify the following settings (leave others with their default values):

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	the name of a new resource group az104-06-rg5
   Application gateway name	az104-06-appgw5
   Region	name of the Azure region into which you deployed all other resources in this lab
   Tier	Standard V2
   Enable autoscaling	No
   Scale units	1
   Availability zone	1, 2, 3
   HTTP2	Disabled
   Virtual network	az104-06-vnet01
   Subnet	subnet-appgw

7. Click Next: Frontends > and, on the Frontends tab of the Create an application gateway blade, specify the following settings (leave others with their default values):

   Setting	Value
   Frontend IP address type	Public
   Firewall public IP address	the name of a new public ip address az104-06-pip5

8. Click Next: Backends >, on the Backends tab of the Create an application gateway blade, click Add a backend pool, and, on the Add a backend pool blade, specify the following settings (leave others with their default values):

   Setting	Value
   Name	az104-06-appgw5-be1
   Add backend pool without targets	No
   Target type	IP address or FQDN
   Target	10.62.0.4
   Target type	IP address or FQDN
   Target	10.63.0.4

   Note

   : The targets represent the private IP addresses of virtual machines in the spoke virtual networks az104-06-vm2 and az104-06-vm3.

9. Click Add, click Next: Configuration > and, on the Configuration tab of the Create an application gateway blade, click + Add a routing rule.

10. On the Add a routing rule blade, on the Listener tab, specify the following settings (leave others with their default values):

    Setting	Value
    Rule name	az104-06-appgw5-rl1
    Listener name	az104-06-appgw5-rl1l1
    Frontend IP	Public
    Protocol	HTTP
    Port	80
    Listener type	Basic
    Error page url	No

11. Switch to the Backend targets tab of the Add a routing rule blade and specify the following settings (leave others with their default values):

    Setting	Value
    Target type	Backend pool
    Backend target	az104-06-appgw5-be1

12. On the Backend targets tab of the Add a routing rule blade, click Create new next to the HTTP setting text box, and, on the Add an HTTP setting blade, specify the following settings (leave others with their default values):

    Setting	Value
    HTTP setting name	az104-06-appgw5-http1
    Backend protocol	HTTP
    Backend port	80
    Cookie-based affinity	Disable
    Connection draining	Disable
    Request time-out (seconds)	20

13. Click Add on the Add an HTTP setting blade, and back on the Add a routing rule blade, clik Add.

14. Click Next: Tags >, followed by Next: Review + create > and then click Create.

    Note

    : Wait for the Application Gateway instance to be created. This might take about 8 minutes.

15. In the Azure portal, search and select Application Gateways and, on the Application Gateways blade, click az104-06-appgw5.

16. On the az104-06-appgw5 Application Gateway blade, note the value of the Frontend public IP address.

17. Start another browser window and navigate to the IP address you identified in the previous step.

18. Verify that the browser window displays the message Hello World from az104-06-vm2 or Hello World from az104-06-vm3.

19. Open another browser window but this time by using InPrivate mode and verify whether the target vm changes (based on the message displayed on the web page).

    Note

    : You might need to refresh the browser window or open it again by using InPrivate mode.

    Note

    : Targeting virtual machines on multiple virtual networks is not a common configuration, but it is meant to illustrate the point that Application Gateway is capable of targeting virtual machines on multiple virtual networks (as well as endpoints in other Azure regions or even outside of Azure), unlike Azure Load Balancer, which load balances across virtual machines in the same virtual network.

Clean up resources

Note

: Remember to remove any newly created Azure resources that you no longer use. Removing unused resources ensures you will not see unexpected charges.

1. In the Azure portal, open the PowerShell session within the Cloud Shell pane.

2. List all resource groups created throughout the labs of this module by running the following command:

   Get-AzResourceGroup -Name 'az104-06*'
   

3. Delete all resource groups you created throughout the labs of this module by running the following command:

   Get-AzResourceGroup -Name 'az104-06*' | Remove-AzResourceGroup -Force -AsJob
   

   Note

   : The command executes asynchronously (as determined by the -AsJob parameter), so while you will be able to run another PowerShell command immediately afterwards within the same PowerShell session, it will take a few minutes before the resource groups are actually removed.

Review

In this lab, you have:

• Provisioned the lab environment
• Configured the hub and spoke network topology
• Tested transitivity of virtual network peering

• Task 4: Configure routing in the hub and spoke topology
• Task 5: Implement Azure Load Balancer
• Task 6: Implement Azure Application Gateway